To have the Corporate details of us please visit www.gmtengineers.com, for product wise informations please visit www.gmtpowerpress.com for the details about Mechanical Power Presses, for informations on Hydraulic Press Brakes please visit www.gmtpressbrake.com and for the details about Hydraulic Shearing Machines please visit www.gmtshears.com.
HYDRAULIC VARIABLE RAKE GUILLOTINE SHEAR
   

HYDRAULIC VARIABLE RAKE GUILLOTINE SHEAR CNCHVR

 

General Specification

 

Our CNCHVR angle adjustment hydraulic guillotine shears are strong and easy to use machines which are able to cut any type of sheet with the best quality and speed.

Machine could be programmed easily with use of dialog programs on CYBELEC control units. When the type, thickness and length of the sheet is entered to the controller, machine, calculates and adjusts blade gap adjustment, back gauge distance, cutting length and cutting angle automatically.

Cutting angle adjustment is done automatically according to sheet thickness, so during cutting thin sheets the shortest stroke is used, to increase Productivity.

 

DAC – 360 Controller ( standard )

 
Compact and complete control for shearing machines  The DAC – 360 provides a complete solution for shearing machines. In addition to the x axis position it offers automatic control of cutting angle, stroke length and gap. The  numerical programming is user friendly and guides the operator through the programming possibilities.
 
 
    Panel based housing
DAC – 360 Controller ( standard )
    Bright LCD screen
    Back gauge control
    Retract function
    Cutting angle control
    Cutting gap control
    Stroke length limitation
    Force control
    Manual movement of axes

CYBELEC DNC 60G Controller

    Automatic calculation of blade gap. Cutting angle and stroke depth according to programmed material and thickness,
    5 pre – programmed material type,
    Stroke depth management by frequency distortion or potentiometer,
    Automatic back gauge re-adjustment according to the blade gap,
    Sequence repeat, sub programs and chain–programming,
    Multi –processor designed using ASIC and SMD. This provides full integration and high safety,
    Keyboard with ergonomic buttons,
    75 x 130 mm Black white LCD graphic Screen ( visible area). 240 x 128 pixel automatic contrast adjustment,
    Internal  SRAM memory,
    Flash memory, updating with RS 232 as an optional. 2x RS 232 port (optional ),
    High speed (250 Khz) N2X axis with PID regulator and programmable resolution,
    Inch/mm, TON/TONS conversion,
    16 input (24 or 32 optional ),
    16 output (24 or 32 optional ),
    Easy cut page.
    Flying cut
   
On CNCHVR, blade gap adjustment, stroke adjustment and back gauge position is automatically adjusted from the DNC
    controller unit according to the sheet thickness. ( Standard )

COLLAPSIBLE FRONT COVER

For safety reasons, front side of the downs are closed with a protection cover and upon customers request, 1m. part on the left side of this cover could be opened. With the help of this system, angles or drawn line cutting could be done easily and controllable.
COLLAPSIBLE FRONT COVER

THROAT

With the help of 350 mm throat depth on standard models, it is possible to cut longer sheets than the standard cutting length thus avoiding extra workmanship costs due  to the longer sheets. Throat depth can be designed up to 500 mm upon request
THROAT

LASER CUTTING LINE

With the help of laser cutting line, angle or drawn line cuttings could be done easily and controllable. (Optional)
LASER CUTTING LINE

PNEUMATIC SYSTEM

Pneumatic sheet support system provides user an easy method of working which is an optional function to protect hanging of sheet down and to improve cutting precision during long and thin sheets Processing.

PNEUMATIC SYSTEM
 

STANDARD EQUIPMENTS

    Mono block, welded sheet frame is rigid to deflection moment and high tensile with ST 44 A1 material.
    Fast and powerful back gauge with 1000mm distance, moving by ball screwed shafts, with automatic swing away feature,
    Avoiding sheet sliding during cutting action, powerful hold downs with maximum performance,
    Roller bearings on the table helps in easy placing sheets on machine,
    CYBELEC DNC 61 G cut controller,
    Honed hydraulic cylinders and chrome coated pistons,
    High quality top and bottom blades,
    Bottom : 4 Cutting Sides  
    Top :4 Cutting sides  
    Hydraulic operated blade gap and angle adjusting system with CNC control,
    Bosch – Rexroth hydraulic system,
    High pressurized silent ATOS pump,
    Front support arms with ruler and flip – stop
    Foot pedal available for single or continuous  cutting
    Cutting line illumination and shadow line
    350mm throat depth ,
    Side and rear guards,
    Automatic series cutting flying cut,
    CNC controlled automatic angle adjustment, stroke adjustment, hydraulic blade gap adjustment.
   
STANDARD EQUIPMENTS

OPTIONAL EQUIPMENTS

    Pneumatic sheet support system,
    Angular front gauge,
    500mm throat depth,
    Oil coolant,
    Laser cutting line,
    Finger protective light curtain,
    Longer front arms or squaring arm,
    Automatic stacking system,
    Dynamic back gauge with servo motors,
    X1, X2 back gauge for angular cutting,
    Stainless steel cutter.
   
OPTIONAL EQUIPMENTS
     
 
 
Web Hosting, Web Design & Web Promotion Services by X Media Solutions.   2009 - Engineers & Enterprisers - All Rights Reserved.   Home I  About us  I   Services  I  Products  I  Clients  I  Contact us



For Power Press please visit :
www.gmtpowerpress.com
For Press Brake please visit :
www.gmtpressbrake.com
For Shearing Machine please visit :
www.gmtshears.com